Making your house more energy-efficient is not a one-time project. It’s something that you have to work on overtime!
In this blog post, we will discuss some of the ways that you can make your house more energy-efficient in the long haul. We will also provide tips on how to stay motivated and keep up with these projects.
Install Solar Panels
Solar panels are a clean and simple way to cut energy costs. They absorb sunlight, convert that light into electricity, and then release the power back into your home. If you have more panels than necessary, you can even sell the excess electricity to utility companies for a profit. If you’re in the Brisbane area and need more solar power in Brisbane, then do a search for reputable suppliers to find out more information and details. Although solar panels can last up to 20 years, they are not maintenance-free. The key is keeping them clean, even a thin film of dust on the surface will greatly reduce their ability to absorb sunlight.
Install solar panels on roofs or other areas with direct exposure to sunlight so they can work at peak efficiency levels all day long without interruption from trees blocking their rays during certain times of year (this is especially important in places where there’s less rain than snow). You might also want to consider installing them inside windowsills if possible since this will increase visibility while reducing the glare caused by reflected light bouncing off reflective surfaces like glass doors or windows themselves – both indoors and outdoors. There are many incentives available for people who want to install solar panels. In addition to the 30% federal solar investment tax credit, some states offer incentives like rebates, grants, or property tax exemptions.
Recaulk Windows And Doors
Caulk is a thick sealant used to fill cracks, crevices, and spaces around windows and doors. It keeps moisture out of the home, prevents drafts, and can also insulate your house better. The best time to caulk is during warm weather when the temperature is above 40 degrees Fahrenheit because caulk won’t adhere if the surface or air temperature drops below that point.
First, remove the old caulk with a utility knife or caulk removing tool. Scrape out all of the old caulk and wash away any debris from both surfaces. Dry the area thoroughly before applying new caulk. Then apply tape around each side of the window or door frame you want to seal, including about ¼ inch beyond where you want to fill in with new caulking material. Apply two beads at once – one on each side – using a continuous motion until you reach the end of that surface, filling in gaps less than ½ inch wide as well as larger cracks between your home’s siding and exterior surfaces like windows or doors. The most common types of caulk are latex-based acrylic (which offers good adhesion and flexibility) or silicone (which is watertight, flexible, and long-lasting). Latex caulks are paintable, while silicone caulks should be painted over with a latex primer. After the caulk dries, remove the tape. If you have any excess caulking material, use a damp cloth to clean it up.
Fix Leaky Faucets And Toilets
A leaking faucet or toilet can waste hundreds of gallons of water each day, costing you money on your water bill. Leaks can also cause damage to your fixtures and promote mold formation. It’s a simple and inexpensive method to save water and improve the energy efficiency of your home by repairing leaks.
You can buy low-flow toilets and showerheads, which use less water than standard fixtures. Low flow fixtures are required by law in new homes and renovations, but you can easily install them yourself. A typical shower use about 36 gallons of water. If you have an 8-foot-tall wall, for example, that is 4 feet thick and 90 inches tall on the floor, it’s going to take a long time to clean if you’re cleaning with just one mop on each side. That being said, there are many other ways to save water in your home.
Upgrade Your Appliances
While it is important to go green in your home by making the switch to energy-efficient appliances, you also want to ensure that they can withstand regular wear and tear over time. As such, you may want to consider opting for smart appliances as opposed to traditional ones. If your washer or dryer breaks down once per year, for example, this could cost upwards of $250 each time on average. This means new appliance upgrades are a solid investment in more ways than one since they have longer shelf lives and consume less energy overall.
Making your home more energy-efficient is a great way to save money and help the environment in the long haul. There are many simple changes you can make to your home that will reduce your energy consumption, and by making these changes, you can improve the overall efficiency of your home.