These hot chocolate mug ornaments are just too cute! You won’t believe how easy they are to make, either! You can make them practically for free, since they’re made of paper towel tubes and paper! Make a bunch of them so you can have your very own set that you can reuse year after year!

Supplies:

1) Paper towel tubes

2) White paper (you need both card stock and regular printer paper)

3) Brown paper (the color of hot chocolate)

4) Cardboard (soft cardboard works best, like the one from cereal boxes)

5) Coffee filters

6) Red and white striped drinking straw

7) Mod Podge

8) Glue

9) A little bit of water in a cup

10) String or embroidery floss so you can hang up your ornament

11) Craft knife

12) Needle tool

Step #1:

Begin by cutting your paper towel tube into 5 equal parts.

Step #2:

Cut circles from cardboard. Each mug needs 2 circles. One will fit on the tube, the other will be slightly smaller. The smaller one will fit inside the tube.

Step #3:

Glue the large circle to the bottom of the tube.

Step #4:

The smaller circle will be glued onto a piece of brown paper. The brown paper will be larger on all sides than the cardboard circle. While the tubes are drying, cut the white card stock. You need a band that is long enough to wrap completely around the tube. The band will also need to be wider than the height of the mug. What you also need is a white card stock circle the same size as the larger circle glued to the bottom of the tube. Use Mod Podge to cover the outside with the band of white paper. Allow the paper to overhang on the top and bottom edges.

Step #5:

Cut a fringe around the paper on the top and bottom. This will make it easier to wrap around the tube.

Step #6:

Wrap the paper onto the bottom of the tube and over the top of it. Use Mod Podge to glue the paper down.

Step #7:

When the glue is dry, glue the circle onto the bottom and cover the wrapped paper ends.

Step #8:

Go back to the small circle that’s glued onto the brown paper. Cut generously around the disc and make a fringe the same way you did above.

Step #9:

When the disc and the tube are dry, put glue around the edge of the disk and put it into the top of the mug. Don’t worry if the hot chocolate disk isn’t even in the mug.

Step #10:

Use your needle to make a small hole near the top of the mug. This is so you can hang your ornament.

Step #11:

To make the mug handle, roll up strips of printer paper. Use a toothpick to help you get started. Soak them in water until the paper roll bends easily.

Step #12:

Curve the paper into a C shape, then set it aside to dry.

Step #13:

When the handles have dried, use a craft knife to cut the ends at an angle. Glue the handles into place.

Step #14:

When the handles are dry, give the entire mug a coat of Mod Podge.

Step #15:

To make the mugs look more realistic, bunch up a piece of coffee filter and glue it on top. This will be the whipped cream.

Step #16:

To make the peppermint stick, cut the straw into equal pieces and glue them to a piece of paper. When the glue has dried, trim around the straws. The white circle of paper will close the tip and make it look like a peppermint stick.

Step #17:

Cut the other end of the straw on an angle and glue it to the top of the mug. Get a piece of embroidery floss and thread it through the hole you poked earlier and make a knot. That’s it! Finished!

Photos and idea: Mega Crafty.

This ornament garland is really easy to create, and definetly steals all the attention when it’s up! If you love Christmas decor that leaves a big impact, this garland is for you! We love the pink glittery ornaments, but you can use whichever colors you like that will match your home. All you need is some ribbon, ornaments, and tape to make this gorgeous decoration!

Supplies:

– Ornaments (around 75 for 4 feet of garland)

– Ribbon

– Tape

Step #1:

Tape one end of the ribbon and twist the tape to create a needle. It’ll be easier to thread your ornaments this way.Step #2:

Thread the ornaments through the ribbon, alternating colors. Leave at least 24″ of ribbon at the end for hanging.

Step #3:

Hang up your garland. Try hanging it over your doorway, on your banister, or on your mantle!

Photos and idea: Jenny Dixon.

Take a look at these other cool Christmas DIYs:

Branch Candle Centerpiece

Glittery Glue Gun Snowflakes

Glittery Pottery Barn Pinecones

The holiday season is coming up fast, and that means getting our home ready! With all the responsibilities we have during this busy time, sometimes there isn’t enough time in the day to get our home into the holiday season. These ornaments are easy to make, and require little time to put together. You can hang them on your tree, place them on a pretty tray for your dining table, or fill up a glass vase with them. They’re Pottery Barn knock-offs, but we think they look much better than the real thing! Keep reading for the tutorial!

Supplies:

1) Pinecones of various sizes

2) Glitter in the color of your choice

3) Crystal color filler

4) Spray adhesive

5) Hot glue gun and glue sticks

Step 1:

Spray your pinecones with spray adhesive and sprinkle glitter over them. Turn the pinecones so that the glitter gets into all the crevices.

Step 2:

Take a pinch of color fill and sprinkle it over the pinecones.

Step 3:

Allow the pinecones to dry completely.

Step 4:

To turn the pinecones into ornaments, use your hot glue to attach a piece of jute twine in a loop to the pinecone. You can attach it to either the bottom or the top.

Photos and idea: Blissfully Ever After.

We’re loving this creepy-cute hanging branch centerpiece! It’s extremely cheap to make and you can put it together in under an hour! Hang it above your table at your Halloween party, we’re sure it will be a hit!

Supplies:

1) A branch

2) Black felt

3) Black fake fur

4) Cheesecloth

5) Black yarn

6) Black spray paint

7) Clear fishing line

8) Fake spiders

9) Hot glue gun and glue sticks

10) Two hooks

11) Scissors

12) Rubber bands

Step 1:

Spray paint the branch using black spray paint. Use a branch that’s gnarled and twisted for a creepy effect. If you can’t find a large enough branch, you can use two smaller ones instead.

Step 2:

To make the bats, cut 8 1/2″ x 11″ sheets of black felt in half. At the bottom of the pieces, cut out 2 inverted triangles (these will be the legs), and then cut a scalloped edge from the legs to the top corners.

Step 3:

For the bat’s body, cut out a 3″ x 4″ piece of fake fur. Roll it up lengthwise and secure it with a rubber band.

Step 4:

Place the fur in the middle of the felt bat wings and fold the wings on top of each other. Glue the wings together using hot glue.

Step 5:

If you have more than 1 branch, you can tie them together using black yarn.

Step 6:

Glue the tips of the bat legs to the branch, making it look like the bats are hanging upside down.

Step 7:

For the creepy cobweb, stretch the cheesecloth over the branch and allow it to tear in spots. Glue a few fake spiders to the cheesecloth.

Step 8:

Secure your hooks to the ceiling. You can use hooks that have a removable adhesive backing if you don’t want to damage your ceiling. Place the hooks above where the branch will hang and tie a piece of fishing line to the hooks.

Step 9:

Tie the other end of the fishing line to the branch.

Step 10:

Adjust the height of the branch if needed and cut off any excess fishing line. All finished!

Photos and idea: EHow.