Photos By: Stock Images

So once again, you’ve found yourself standing in the shower covered in soap suds, trying to avoid the arctic cascade of water jettisoning out of the shower head. Who would have thought that water could be that cold? Furthermore, we bet you weren’t thinking about your boiler’s heat exchanger or how to fix it as you darted out of the shower in search of your warm towel, only to find the towel rail was icy cold too.

Don’t worry; you are not alone. In fact, many people don’t know what a heat exchanger is, what it does, or how to fix it. This is because most people are only concerned with why their boiler is on the proverbial blink and how to rectify the issue immediately when things take an icy downward turn! The truth is a faulty boiler heat exchanger is one of the most common boiler faults, no matter what make or model you own! This guide will detail the role of the heat exchanger, issues that can cause faults, and how to fix them.

What The Devil Is a Heat Exchanger? 

Heat exchangers are components in electronic equipment such as power plants, fridges, air conditioning units, and in this case, boilers that convert energy (gas) into heat (hot water). So how do they work in boilers? Heat exchangers in gas boilers transfer heat from burning gas (combustion) to the water, thus generating hot water. The hot water circulates the heating system (radiators and towel rails) and then returns to the boiler via the return flow pipe. Therefore, it’s perfectly feasible to say that a heat exchanger is vital for your boiler to function correctly. Heat cannot be transferred to the water without a heat exchanger, leaving your shower and radiators out in the cold. In other words, your boiler will be unable to provide the hot water and central heating you need for your home.

Common Issues with Heat Exchangers

Because the heat exchanger is a vital component of your boiler, it’s pretty much in use all the time, which means things are bound to go wrong eventually. The good news is that boilers will display an error code if they are experiencing an internal issue like a faulty heat exchanger. While there are a variety of possible faults that affect heat exchangers, two pop up frequently, namely central heating sludge and limescale build-up.

Central Heating Sludge

Central heating sludge is a build-up of rust particles and dirt in the water circulating the heating system (radiators, towel rails, boiler). This gloopy sludge occurs when debris from the pipes and joints infiltrates the water, causing blockages in the system and heat exchanger. Older heating systems are most at risk of central heating sludge; however, this milady can also affect newer ones, although it’s not as common.

Symptoms:

Symptoms associated with central heating sludge include:

•       Light scratching or tapping sounds as bits of rust pass through the heat exchanger.
•       The boiler may lock out (shut down) due to poor water circulation caused by the debris.
•       Black water may come out when you bleed the radiators.

Solution:

To resolve a central heating sludge issue, you will need to request the assistance of a Gas Safe engineer who can:

•       Check the heat exchanger for damage
•       Clean the heat exchanger
•       Power flush the heating system to remove existing sludge
•       Add a chemical additive (central heating inhibitor) to clean the system
•       Fit a magnetic filter to collect the sludge and prevent future build-ups

Note* The magnetic filter should be cleaned when your boiler has its annual service to ensure the filter doesn’t become overly full and stop doing its job.

Photo By: Pxhere

Limescale Build-up

Limescale build-up is extremely common in areas that struggle with hard water. Limescale develops from minerals found in water but is more prevalent in hard water. When the water flows around the heating system, mineral deposits attach to the inside of the pipes, radiators, and boiler components, including the heat exchanger. As a result of limescale build-up, the boiler’s components (heat exchanger included) break down or stop functioning efficiently.

Symptoms associated with limescale build-up include:

•   Whistling/kettling (boiling noises) caused by hotspots or boiling water inside the heat exchanger.
•   Hot spots caused by the limescale may cause the water in the boiler to become too hot. As a result, the NTC thermistor will register the excessive heat and cause the boiler to lock out.
•   The heat exchanger may become damaged or cracked due to increased heat; this can cause water to leak from the bottom of the boiler casing.

Solution:

When dealing with a limescale build-up, it’s best to keep those DIY dreams to a minimum.

Instead, it’s recommended you enlist the help of a professional Gas Safe Heating Engineer who will:

•   Use a limescale silencer to break down the limescale build-up in the heating system.
•   Fit a limescale reducer to collect limescale mineral deposits floating around the heating system.
•   Check the heat exchanger for damage and, if possible clean it. However, sometimes the build-up has become so bad the exchanger has already cracked. In this case, the engineer will need to replace the heat exchanger with a new one.

Photo By: Pxhere

Repair Vs. Replacement

 Sadly, repairing your heat exchanger isn’t always an option, especially if extensive damage has already occurred. Unfortunately, a new heat exchanger doesn’t come cheap and can cost anything from £500 upwards.

•   Always check if your boiler has any remaining warranty, as usually, this covers the cost of replacing the heat exchanger, excluding labour costs depending on the warranty terms and conditions.
•   If your boiler is an older model, consider replacing it rather than spending money on repairing a system for which finding parts may prove difficult.

The Final Hot Spot

 Heat exchangers are crucial for the proper functioning of your heating system. And when they develop faults, they certainly put a damper on the coziness of your home! That said, in most cases, a faulty boiler heat exchanger is due to limescale or sludge build-up, which for the most part, can be avoided with regular annual boiler services. If you suspect your heating system is struggling with a faulty heat exchanger, call in the experts who can assess the situation and get your boiler back into piping-hot, tip-top shape!

Photos By: Stock Images

Winters in many places can be freezing cold, so you have to be wondering, what can keep your living room at 68 degrees Fahrenheit in the middle of December. Although most homes have a central heating system installed, it can be confusing to understand the various parts.

In the following article, we’ll go through three of the most used heating systems: heathers, boilers, and furnaces. We’ll explain the difference between the three of them and what heating system can be the best choice for you.

The Definition of a Heater Is Broad

It can be difficult to define the term heater. It is a generic term that refers to a device that heats up an area. The Roman Empire was the first to develop the central heating that we know of today. Romans had an underground source for combustion, which was distributed through holes in the ground and pipes running along walls.

Today, we have a more modern approach to central heating as the unit has a place for the heating device, usually in the attic or basement. This is where heat is generated and distributed throughout the building. This method is common in commercial buildings, apartments, and houses.

Because of the broad definition, many devices can be called heaters. Here are just a few examples of home heating options:

• Gas or wood-burning fireplaces
• Solar heating systems
• Portable heating devices
• Radiant heat systems
• Boilers
• Furnaces

What Is a Furnace?

A furnace is an enclosed space that has electric or gas heaters. The heaters are used to generate warmth and distribute it throughout the space. The air in a furnace gets heated up by the heaters and then blown across the room through ducts or vents.

A lot of people most commonly use furnaces to efficiently heat up their place. However, proper installation is essential for the furnace to work as it should. That’s why you’ll need to find the right local services for installation and maintenance. For instance, if you live in a big city like Ottawa, Canada, you should look for a reputable furnace installation Ottawa company that will install your furnace and offer services such as repairs and maintenance. 

Furnaces are economic and efficient which is why people use them so much. They can be used in living and commercial spaces. Their main job is to provide a warm and comfy environment in winter, but can also be used as a way to regulate room temperature. Typically, you can find them in both residential and commercial settings. Furnaces come in different styles and sizes, depending on your needs, such as how much heat you need or the type of fuel you use.

What Is a Boiler?

Boilers are similar to furnaces, in that they create and distribute thermal energy from one central location. However, boilers heat your home with water and not air.

There are two main types of boilers and they can run on gas, electricity, or wood. 

• Hot water boiler. The water flows through the vessels and it gets warmed up, but not boiling hot. The warm water goes through the pipes in your floors, radiators, and baseboards, heating them in the process.
• Steam boiler. They warm up the water to a degree where it evaporates and turns into steam. The steam is sent to the pipes across your house, and as it cools down it turns liquid again. Once the steam is back to liquid again, it is sent back to the boiler and the process is repeated. 

How Do I Know Whether I Have a Furnace or a Boiler?

There are several differences between furnaces and boilers, and thanks to this article, you’ll be able to differentiate between the two of them.

• Radiators or vents. If you have cast-iron radiators, then you have a boiler. If you have a furnace, then your home has vents on the ceiling or walls, and warm air blows through them.
• Location. Boilers are placed in your bathroom, kitchen, or laundry room, while your furnace is typically placed in your basement or attic.
• Size of the pipes. Boilers are typically attached to smaller pipes, while the furnace has a large, round pipe that comes straight out of it.
• Size of the object. Boilers are normally measured in kilowatts. But the size of a furnace can extend all the way up to your ceiling.

Bottom Line

Modern central heating systems use a furnace, boiler, or a combination of both in order to create warmth. Without them, a central heating system wouldn’t make much sense. As winter approaches everyone must think about how to keep their home warm this winter. So, make sure you choose the right solution for you and your home.